Antefix Board Material

Natural lumber wooden or to dig into a certain thickness thin, adhesion, then in plywood surface into a hot for interior decoration and furniture surface materials. Building adornment layer USES plywood mainly do. Plywood key features are : have a beautiful decorative pattern, and the wood to make full use of timber resources, a

Product Details our paper faced gypsum board made by nature gypsum, light weight, high edge, rigidity, strong nail pull resistance, smoothness Description: Gypsum board for ceiling and partition Category: Regular, water-resistance, fire-resistance, moisture-resistance Length: 2000mm-3000mm Width: 1200mm-1220mm

We are Xuzhouhengxin Wood Co., Ltd. We main supply the products of plywood, film faced plywood, marine plywood, block board, MDF. The sizes are 1220MM*2440MM and 1250MM*2500MM . The plywood: plywood using poplar, combined hardwood, Okoume, Obeecke, Bintangor, Birch etc. The types of glue are MR, WBP and Melamine. The marine plywood: Face/Back: We

The plywood: Size: 1220*2440/1250*2500mm Core: using poplar, combined, hardwood, Birch, pine etc. Core size: 84*127cm Face/back: Okume, Bintangor, poplar, birch, pine etc; The grade: A-F grade. Glue: MR, WBP and Melamine. Thickness: from 2.5 -40mm. Moisture: 8-14% The marine plywood: Size: 1220*2440/1250*2500mm Face/Back: 1.

We are Xuzhouhengxin Wood Co., Ltd. We main supply the products of plywood, film faced plywood, marine plywood, block board, MDF. The sizes are 1220MM*2440MM and 1250MM*2500MM. The plywood: plywood using poplar, combined hardwood , Okoume, Obeecke, Bintangor, Birch etc. The types of glue are MR, WBP and Melamine. The marine plywood: Face/Back: We

The plywood: Size: 1220*2440/1250*2500mm Core: using poplar, combined, hardwood, Birch, pine etc. Core size: 84*127cm Face/back: Okume, Bintangor, poplar, birch, pine etc; The grade: A-F grade. Glue: MR, WBP and Melamine. Thickness: from 2.5 -40mm. Moisture: 8-14% The marine plywood: Size: 1220*2440/1250*2500mm Face

XuZhou HengXin Wood Co., Ltd, which located in the plywood town-Pizhou, China. The flowing is the introduction of our products: Commercial Plywood Description This is the most commonly used wooden board made of quality timber of which the core and outer layers are bonded with urea formaldehyde resin. It is the prime raw material in the furn

We can produce and supply the following plywood board: Specifications: 1) Quality: BB/BB, BB/CC, CC/DD Grade 2) Sizes: 1220 * 2440, 1250 * 2500mm 3) Thickness: 2.4mm-30mm 4) Face: Okoume, Birch, Pine, Harwood, Meranti, Bintangor, Sapeli, etc 5) Core board: Poplar, Birch, hardwood, pine, or compound 6) Glue: MR, WBP, Melamine

wood Plywood Product Description Face/back: Okoume(Imported from Gabon, Congo and Equatorial Guinea); Birch(Imported from Russia); Pine(Local and imported from Russia, Monterey pine imported from New Zealand ), Bingtangor(imported from Papua New Guinea), Meranti(Imported from Malasiya), Canarium(imported from Papua New Guinea), Popl

Begonia Begonia is a synthetic wood that is made from plastic compound base from polystyrene( ps )not PVC. Begonia can be used for interior finish such as : Ceiling, wall and floor covering, skirting board and moldings. Though made by synthetic material, the texture, appearance, and feeling are just similar as finished wood. Wider application r

All plumbing supplies, PVC, copper, mdf board, and teak lumber from myanmar. All types of masks. If you are interested, please do not hesitate to contact our office for more information, and at the same time we hope to set up a long-term business relationship with your esteemed company in the very near future.

We can offer rubber wood board in various sizes, thickness, lenght and width. Qualtiy standard a with 80%; standard b with 20% Standard a : The surface of board without below character : -hole by woodworm - sapwood - knots - mildew Standard b - one side of board be allowed with 1-2 gnarl. Inside the wood without division. Moisture con

The business will not be on spot basis. We hope to create long term relationship with a good supplier. If you are interested, please do not hesitate to contact with our office for more information, and at the same time we hope to set up a long-term business relationship with your esteemed company in the very near future.

I am looking for gypsum board manufacturer, roving yarn for gypsum cornice. If you are interested, please do not hesitate to contact with our office for more information, and at the same time we hope to set up a long-term business relationship with your esteemed company in the very near future.

We would like to import vulcanized fiber sheet from Japan or Europe. Application of VFS is the raw material of comber boards. Please contact email / fax at earliest. Sincerely wish to establish long-term business relationship with your company.

We wish to buy high-pressure laminated ( HPL ) sheets in color Light Oak. Specs : size 1220mm x 2440mm, thickness : 0.50mm, color : light oak, qty : 190000pcs. Kindly send your best offer based on FOB the Origin country. Best regards Sincerely wish to establish long-term business relationship with your company.

We are classic custom closets; we are looking for a source for melamine wood laminate board. If you can supply, please advice with C &F price by Fax. If your prices are competitive, we will purchase big volume soon.

Need volume of lightweight mdf. Please see the density and specific gravity and please note size. These are not normal for Chinese manufacturing. Please, only contact if you can do complete package to below specifications. Mdf density specific gravity Lightweight 38lbs cft 0.50 to 0.80 Thickness width mm length mm 14 mm 1220 4887 14 mm

We require all kinds of flooring material such as ceramic stones, granite, and marble slabs and tiles required large quantity. If you can supply, please contact us. If your price is competitive, we will soon buy a big volume.

We would like to import MDF from southeast countries. Details are as follows. 15/18mm 1220x2440mm CNF Inchon Volume : 3,000cbm / month Density : Normal density Your kind quotation will be highly appreciated.

We are requesting some information ( FOB rates / CBM )of MDF sanded boards in the following specifications : >244cm x 122cm x 18mm >220cm x 70cm x 6mm >220cm x 80cm x 6mm >220cm x 90cm x 6mm If you can supply, please advice with C &F price by Fax.

Thickness required 2.5, 3, 4, 5, 8, 11, 16, 17, 18 &25 millimeters. Size 8x4 feet. Base material wood. Minmum order quantity would be trial order of 2 to 3 containers, and regular requirements of 2500 cubic meters + per month. Product color should be medium to lighter. Payment terms lc at site. If you can offer please contact us. Specification