Sell aluminum composite panel

Product name : aluminum metal composite panel place of origin : cn national patent number : 02207874.6 01220703.9 international patent number : pct / cn022000230
These panels are used in applications where many pieces of aluminum roll materials in a thinner dimension are compounded together to form an aluminum panel with the thickness as required.
Then, the optimized composite is obtained. Materials : 1 ) front side : aluminum roll coated pvdf ( based on kynar500 ) or polyester 2 ) core : multi-pore aluminum 3 ) rear side : aluminum coated with polyester specifications : 1 ) aluminum sheet thickness : a ) 0.50 x 0.50mm b ) 0.40 x 0.40mm c ) 0.21 x 0.21mm d ) 0.15 x 0.15mm e ) 0.30 x 0.21mm f ) 0.21 x 0.15mm g ) 0.15 x 0.10mm 2 ) panel thickness : 3mm, 4mm, 6mm 3 ) dimensions : a ) width : 1220mm, 1575mm b ) length : 2440mm, upon customers' request 4 ) standard size ( width x length x thickness ): a ) 1220 x 2440 x 3mm b ) 1220 x 2440 x 4mm 5 ) normal color : 31 kinds 6 ) non-standard sizes and special colors are available according to customers' requests characteristics : 1 ) high intensity : since multi-pore aluminum roll materials are used for the middle layer, it saves 20% materials based on the whole decorative panel. Moreover, appearance density is 20% lower than that of normal panels. However, it has the mechanical property of composite materials, so its strength is higher than that of single aluminum plates of the same thickness.