GSM Wireless Burglar alarm system have eleven wireless protection zones, two wired protection zones, partial disarmed, remote telephone control, remote electricity control and compatible with CCTV surveillance and centre monitoring system.

It also have the function for GSM network protection, short message sending function, DIY, Customize, easy and install.

FEATURES

1. Wireless type, easy to install, without phone line.
2. Remote control, convenient.
3. Password protected
4. SMS to enable arm / disarm, partial arm / disarm, siren
5. High siren volume so to scare away intruders
6. SMS and auto dial up three phone numbers, locale monitoring start on.
7. SMS to recheck the GSM panel status, alarm report, zone name, arm / disarm status.
8. Audible / mute siren programmed
9. Panic help
10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to
battery back-up
11. Enable to setup alarm receiving central through GSM network.

Specification:
1.Protection zone: wire: 2 wireless: 11
2. GSM band: 850/ 900 / 1800/ 1900mhz
It can save six alarm telephone number and separately set SMS function or telephone
alarm. Transmitting power consumption: 1W
3. LED indicators: 8
4. Low power protected time: < 1 s
5. Data responds time: < 10s (standard network)
6. Working power voltage: AC 110~220V 50-60Hz (optional)
panel power consumption: < 3W
Battery back-up: DC 9v Standby last > 4 hours
7. Working condition:
Temperature-20 C +60 C
Humidity: -20 C +60 C
8. Net weight: 0.75 KG.
Gross weight: 0.85kg.
9. Panel Size: 180mm l, 30mm w, 2mm h
We look forward contributing to your success. Thank you and best regards