Description:
It is an international mounting configuration that allows the solenoid valve to be bolted over the supply ports of a pneumatic actuator of both double acting or spring return type. All of the pneumatic actuators on our ball valves and butterfly valves have the interface.

Features:
* Manual override.
* Low wattage coil fully encapsulated with LED illuminated plug to IP65.
* Air/spring combination for positive return and dust proof spring cap.
* Nitrile - Seals for lubricated air.

Specification:
Model 4M110-M5 4M120-M5 4M110-06 4M120-06 4M220-06 4M210-08 4 M220-08 4M310-08 4M320-08 4M310-10 4M320-10

Position And Way No Two-position five way
Effective Sectional Area cv=0.31(5.5mm2) cv=0.67(12mm2) cv0.78(14mm2) cv=0.89(16mm2) cv=1.4(25mm2) cv=1.68(30mm2) cv=0.89(16mm2)

Position and Way No. Two-position Five way Joint Pipe Bore Air Intel=1/4" Exhaust=1/8"

Working Medium 40Micron Filtered Air

Motion Pattern Inner Guide Type

Working-Pressure
0.15-0.8MPa (21~114 Psi)

Max.Pressure
Resistance 1.2MPa (170 Psi)
Operating Temperature 5~60;
Voltage Range -15%~+10%
Power Consumption AC: 3.5VA DC: 2.5W
Insulation&Protection Class F Class IP65
Wiring Form Lead Wire or Connector type Highest Action Frequency 4 Cycle / Sec Shortest Excitation
Time 0.05 Second
Please contact us for more information!