1. Fa502 ring spinning frame
Fa502 ring spinning frame series is fit for spinning pure cotton fibers, blended polyester cotton fibers and chemical fibers under 51mm, 65mm and 80mm. The bearings of the frames are all rolling ones, the drafting and driving structure is made up of steel bevel wheels. Therefore, the frame involves less maintenance labor, runs steadily, and gives good spinning performance.
Its jacking system employs stretch torsion lever, which lightens the frame weight and creates a compact chamber. The electric control bottons are set together at the right side of the frame head. Automaticity :
Stop at an appropriate position whenever the frame is stopped while spinning.
If early doffing is needed, the ring bar can be lowered to an appropriate position automatically.
When the bobbins are full, the ring bar falls automatically and the frame will stops at an appropriate position.
Before startup, the ring bar will reposits automatically.
Before doffing, the doffing power supply will be switched on automatically.
After startup, the conversion operations from low speed to high speed is done automatically.
When spinning the direct weft, the bottom bunchings are wound automatically.
Main features :
The drafting gears, twisting gears, and winding gears are of the same standard and they can replace each other. When a pair of drafting gears is changed, the drafting ratio are changed accordingly. The cam is driven by a worm wheel with a reduction box, which is lubricated in oil-bath and gives stable lifting and descending performance.
The rotation of the spindles are driven by the stretching pulleys with rolling bearings to adapt to the high speed rotation. Single jockey pulley and double jockey pulley are chosen by the clients.
To adapt to the high-speed rotation, the high-speed multilayer oil film damping spindles and the wedgeproof rings are employed. The thread board and the ring bar are controled by a windlass and wind down system, which moves steadily and creates the wanted yarn bobbin shape to accommodate to the high-speed coning.
2. Fa506 ring spinning frame
The Fa506 ring spinning frame has high automaticity and produces high-quality yarn. Moreover, it is designed for easy operation and management. The frame is fit for spining pure cotton fibers, pure chemical fibers and blended fibers into yarns for weaving and knitting purposes.
The compact and reliable head-end driving.
High-speed synchronous dentiform belt, having damping effect.
The gears has uniform modulus, aperture and width. The adjusting gears for drafting, twisting and winding can replace each other.
The position of the rotor of lifter cam is adjustable, to adapt to the travel change of the ring bar.
Difference of potential system is employed to enable the thread bar to rise and descend in changeable travel.
Dual torsion lever for balance, of simple and reliable structure.
The cams can be set in either right or worng posture, when the high-speed bobbin winders are pushed back, there is no coil slippage.
The frame stander is stabe and has little vibration in high-speed running.
Three auto-pick-motion system.
Electro-magnetic brake system.
Main specifications.
Spindle gauge 70mm
Lifting 180,205
Ring Dia. 38. 40. 42. 45mm
Yarn count 4.9 97. 2tex( 120 6 Ne )
Twist 230-1740 T/m
Spindle speed 12000-20000( rpm )
Draft Total draft : 10-50
Rear zone draft1 : 06-1.53
Twist Direction Z twist ( single tension pulley ), Z or S twist ( double tension pulley )
Draft type 3 line rollers, double aprons ( long and short ), pendulum arm weighting
Roving Creel Bobbin hangers of six or four rows in single tier 152*406mm
3. Fa601A / Fa601B ring spinning frame
The machines are high speed, efficient and self-exhausting open-end spinning machines which impurities discharge mechanism. They can be suitable for spinning cotton, wool, ramie, silk, polyester, acrylic, viscose, vinylon, polypropylene, polyamide and their blends.
Main features :
To spin the yarn 10-68 Nm ( 100-14. 7tex )directly from two passages drawn sliver 0.2-0.45Nm ( 5000-220tex )
Using the programmable controller ( PC )
The modle Fa601B adopts the inverter for controlling the motor speed and adjusting the spinning parameters.
Equipped with the conveyer for saving winding costs.
Main specifications :
Type of machine Two side
Spindle guage 120
Number of position 200 100 / side
Rotor Diameter( mm ) 54 66
Rotor Speed( rev / min ) 30000 35000 40000 45000 50000
Drafting range 35-230.5
Suitable length(mm ) 25-40
Sliver line Densitg 5000-2200tex 0.2-0.45Nm
Dimension of tube 230*900
Suitable number 100-14. 7tex* 10-68Nm 50-14. 7tex 20-68Nm
Shape of winding Rollof Eupal Rank Straight Tube
Dimension of tube ( MM ) 50*56*98
Dimension of package ( MM ) 230*90
Package weight ( KG ) about 1.5
Total power consumption ( KW ) A 36.2 B 34.8
Dimension of overall ( length * width * high ) A 15588*900*1930 B 15600*900*1930
Machine weight(T ) 8.0
4. Fa608 rotor spinning machine
The machines are high speed, efficient and self-exhausting open-end spinning machines which impurities discharge mechanism. They can be suitable for spinning cotton, wool, ramie, silk, polyester, acrylic, viscose, vinylon, polypropylene, polyamide and their blends.
Main features :
To spin the yarn 10-68Nm ( 100-14. 7tex )directly from two passages drawn sliver 0.2-0.45Nm ( 5000-2200tex )
For the requirement of winding and further processing.
Controlled by programmable controller ( PC )
For saving labour, are equipped with a full-package conveyer.
Both have the functions of spirning parameter monitoring and displaying.
Is fitted with the tension compensation device and yarn storage device, it can take up the taper package.
Adopts inverter to control motor speed and adjust spinning parameter.
Main specifications :
Guage 120
Numbet of Units 120 168 192
Rotor Speed 30000-75000
Rotor Diameter 43 54 66
Combing roller speed 5200 6200 6700 7200 8200
Drafting ratio 35-230.5
Sliver count 0.2-0.45Nm 5000-2200tex
Take-up speed 20-116.7
Can dinmension 250*900 300*900 350*900 400*900
Dimension 68* 62*170( Taper Tube ) 56* 50*170( Cyinder Tube )
Package dimension 300* 150( Cyinder Tube ) 250* 150 3'30' Taper Tube )
Package weight Appro*.4( Cyinder Tube )
Power consumption
( KW )
Rotor driving 2*11
Combing roller driving 2*3
Fan fro third hard 1*3
Fan for impurity discharge 1*4
Conveyer belt driving 1.04( with reducer )
Gear box driving 1*4( Drawing )+1*0.75( feeding )
5. Pressing pulley bearings
Pressing pulley bearings dpecifications :
Model Description Notes
FA601-2400-14
FA601-2400-12
FA601-2400-17A Supporting pulley bearing compound
Pressing pulley bearing compound
Pressing pulley bearing compound With rotor spinning machine Fa601
SN-020900-3
SN-020900-11 Pressing pulley compound
Small supporting pulley compound With rotor spinning machine SNBD200
6. Geaars for rotor spinning machine
7. Spinning components
Opening rollers and rotor specification :
Model D1 D2 D3 H h1 h2
SN-020100-10 OK40 64.6 30 23.5 92 24.1 33.5
SN-020100-10 OK36 64.6 30 23.5 92 24.1 33.5
SN-020100-10 OK37 64.6 30 23.5 92 24.1 33.5
Model D1 D2 D3 D4 H h1
SN-020100-4 57 54 22 10 127.3 31
SN-020100-3 69.5 66 22 10 127.3 31
Model D1 D2 D3 D4 H h2
SN-020100-32 57 54 22 10 127.3 31
SN-020100-33 69.5 66 22 10 127.3 31
F1602-020100-2 47 43 22 10 127.3 31
