Sell Lathe GH1440A

The lathe bed's rigid structure is made of high tensile cast iron. The bed rails are hardened and ground.
The spindle is equipped with 2 precision taper roller bearings (D7211, D7212 )
65 types of metric or inch threads are provided, which can be cut by means of levels.
The lathe is equipped with a safe and dependable mechanism brake system.
The lathe can precisely machine many kinds of work pieces.
The lathe's high speed, low noise and exquisite structure will be your best choice.
SPECIFICATION INCH METRIC
Swing over gap 14" 356mm
Swing over cross slide 85/8" 220mm
Swing over gap 20" 506mm
Length of turning 40" 1000mm
Hole through spindle 11/2" 38mm
Taper of spindle bore M.T. NO.5
Number of spindle speed 8 or 16(2 speed motor )
Range of spindle speed 90 or 45 '1800 r.p.m
Taper of quill sleeve M.T. NO.3
Travel of tailstock sleeve 41/2" 115mm
Metric threads can be cut 0.45-7. 5mm 0.4-7mm
Number of metric threads 22 37
Inch threads can be cut 4-112 T.P.I 4-56 T.P.I
Number of inch threads 40 28
Pitches of feed lead screws 8 T.P.I 4
Range of longitudinal feeds (40 ) 0.0012-0.0294in / rev (42 ) 0.043-0.653mm / rev
Range of cross feeds (40 ) 0.0003-0.0100in / rev (42 ) 0.015-0.220mm / rev
Travel of cross slide 7" 180mm
Travel of top slide 4" 100mm
Motor horse power 2/3. 3hp 1.5/2. 4kw
Motor frequency 60Hz or 50Hz
Overall dimensions( LxWxH ) 751/2"x29"x47" 1950x760x1480
For more details, please visit our website.